Model Gallery

The Model Gallery features COMSOL Multiphysics model files from a wide variety of application areas including the electrical, mechanical, fluid, and chemical disciplines. You can download ready-to-use models and step-by-step instructions for building the model, and use these as a starting point for your own modeling work. Use the Quick Search to find models relevant to your area of expertise, and login or create a COMSOL Access account that is associated with a valid COMSOL license to download the model files.

Primary Creep Under Nonconstant Load

In this model example, you will study the creep behavior of material under non-constant loading. You will model the primary creep using a Norton-Bailey law and study the difference between the time hardening and the strain hardening methods available in COMSOL Multiphysics. The model is taken from NAFEMS Understanding Non-Linear Finite Analysis Through Illustrative Benchmarks. The load consist ...

Electric Heating in a Busbar, Modeled with LiveLink for Inventor

This tutorial model of the Joule heating effect in a busbar demonstrates how to synchronize an assembly between Inventor and COMSOL, how to modify the geometry from COMSOL, and how to run a geometric parametric sweep.

Electric Heating in a Busbar, Modeled with LiveLink for Solid Edge

This tutorial model of the Joule heating effect in a busbar demonstrates how to synchronize an assembly between Solid Edge and COMSOL, how to modify the geometry from COMSOL, and how to run a geometric parametric sweep.

Electrochemical Glucose Sensor

Electrochemical glucose sensors use amperometric methods to measure the concentration of glucose in a sample. This example models the diffusion of glucose and ferri/ferrocyanide redox mediators in a unit cell of electrolyte above an interdigitated electrode. The sensor gives a linear response over a suitable range of concentrations. The Electroanalysis interface is used to couple the chemical ...

Caughey-Thomas Mobility in a Semiconductor

With an increase in the parallel component of the applied field, carriers can gain energies above the ambient thermal energy and be able to transfer energy gained by the field to the lattice by optical phonon emission. The latter effect leads to a saturation of the carriers mobility. The Caughey Thomas mobility model adds high field velocity scattering to an existing mobility model (or to a ...

Modifying Imported CAD Geometry with the Deformed Geometry Interface

When you are working with foreign CAD or ECAD data, such as files in the STEP, GDS, or IGES file formats, or any of the other supported formats, you may think that you need to re-import a new CAD file and start your modeling over from scratch if you want to study a change in size or shape. But, in fact, you can modify the geometry that you've imported with some clever usage of the Deformed ...

Optimization of a Tuning Fork, Modeled with LiveLink for Pro/ENGINEER

This model computes the fundamental eigenfrequency and eigenmode for a tuning fork that is synchronized from Pro/ENGINEER via the LiveLink interface. The length of the fork is then optimized so that the tuning fork sounds the note A, 440 Hz.

Modeling a Distributed Model of Thermal Microactuator on a Cluster

A model of a thermal microactuator requires the coupled simulation of electric current conduction with heat generation, heat conduction, and structural stresses and strains due to thermal expansion. The purpose of this model is to demonstrate how to access the cluster computing functionality in COMSOL from COMSOL Desktop and use it to submit a batch job to a cluster through a job scheduler. The ...

The Blasius Boundary Layer

The incompressible boundary layer on a flat plate in the absence of a pressure gradient is usually referred to as the Blasius boundary layer. The steady, laminar boundary layer developing downstream of the leading edge eventually becomes unstable to Tollmien-Schlichting waves and finally transitions to a fully turbulent boundary layer. Due to its fundamental importance, this type of flow has ...

Gate Valve in Pipe Branch

A gate valve in a piping branch point is simulated using high viscosity in the gate itself. A parametric run varies gate position from 100% open to fully closed

Quick Search