J. Crompton, S. Yushanov, L.T. Gritter, K.C. Koppenhoefer
AltaSim Technologies, Columbus, OH, USA
The resonance conditions for surface plasmons are influenced by the type and amount of material on a surface. Full insight into surface plasmon resonance requires quantum mechanics considerations. However, it can be also described in terms of classical electromagnetic theory by considering electromagnetic wave reflection, transmission, and absorption for the multi-layer medium. The two commonly ...
ACOUSTICS@MBD CONSULTANTS, LLC, Westborough, MA, USA
There is a practical interest among composite materials manufacturers to high-speed accurate non-destructive evaluation (NDE) technology for voids inspection when these voids are natural components of such complex structures like resin insulated layer of double-sided copper-clad laminates. Model based design (MBD) of NDE system is one of principal solutions for voids inspection in such composites ...
Simulation of Acoustic Energy Harvesting Using Piezoelectric Plates in a Quarter-Wavelength Straight-Tube Resonator
B. Li, J.H. You
Southern Methodist University, Dallas, TX, USA
An acoustic energy harvesting mechanism at low frequency (~200 Hz) using lead zirconate titanate (PZT) piezoelectric cantilever plates placed inside a quarter-wavelength straight-tube resonator has been studied using COMSOL Multiphysics 4.3 and compared with experimental data. When the tube resonator is excited by an incident wave at its acoustic eigenfrequency, an amplified acoustic resonant ...
A COMSOL Model of Damage Evolution Due to High Energy Laser Irradiation of Partially Absorptive Materials
P. Joyce, J. Radice, A. Tresansky, J. Watkins
United States Naval Academy, Annapolis, MD, USA
In this paper we present a transient numerical model of the heat transfer and thermochemical damage evolution in an IR translucent material using COMSOL Multiphysics. The model is evaluated using literature supplied and experimentally determined material properties for carbon black laden PMMA (polymethyl-methacrylate). This variant of PMMA was chosen because it is homogeneous, isotropic, and the ...
University of Hartford, Hartford, CT, USA
Laser percussion drilling is widely used in the aerospace industry to produce cooling holes in jet engine components. This process is a thermal, contact-free process which involves firing a sequence of focused optical pulses onto a target material [1-4]. During each optical pulse, the central portion of the target area heats to a liquid then vapor state where the expanding gas produces a recoil ...
Pulsed Eddy Current Probe Development to Detect Inner Layer Cracks Near Ferrous Fasteners Using COMSOL Modeling Software
V. Babbar, P. Whalen, T. Krause
Department of Physics, Royal Military College of Canada, Kingston, ON, Canada
Surface breaking cracks in conductive structures can be detected by conventional eddy current techniques. However, it is very difficult to detect inner layer defects in multilayered conductive structures either by conventional eddy current or ultrasonic methods. The transient/pulsed eddy current (PEC) technology can potentially overcome these limitations and is being developed for detection of ...
Y. Lu, E. Garboczi, D. Bentz
National Institute of Standards and Technology, Gaithersburg, MD, USA
The prediction of concrete materials service life is not easy, because the complex heterogeneous microstructure and the random nature of concrete materials. Study the presence of cracks in concrete and their effect on coupled reaction and transport are of great interest in civil engineering. Cracks with different widths and depths will reduce the cover thickness and accelerate the migration of ...
G. Zhu, E.M. Dede
Toyota Research Institute of North America, Ann Arbor, MI, USA
In previous work, a two-dimensional (2D) model was carried out to simulate the phononic band structure of a phononic crystal with square lattice structure, but this model did not account for the out-of-plane phonon dispersions . In fact, for 2D films used for coating materials, it is more interesting to understand their cross-plane properties. In this work, the phonon dispersion relation of 2D ...
A Study into the Acoustic and Vibrational Effects of Carbon Fiber Reinforced Plastic as a Sole Manufacturing Material for Acoustic Guitars
J. O'Donnell, G. McRobbie
University of the West of Scotland, Paisley, Scotland, United Kingdom
This study will research a modern design of acoustic guitar by analysis of the vibrational modes. The guitar that will undergo testing has been provided by Emerald Guitars and is solely constructed using Carbon Fiber Reinforced Plastic (CFRP). With the use of COMSOL Multiphysics© the soundboard of the guitar will be simulated and analysis will be carried out to determine the first 10 ...
P.K. Jain, V.B. Khane, J.D. Freels
Oak Ridge National Laboratory, Oak Ridge, TN, USA
Missouri University of Science and Technology, Rolla, MO, USA
Simulation models for steady state thermal hydraulics analyses of ORNL’s HFIR have been developed using COMSOL. A single fuel plate and coolant channel of each type of HFIR fuel element was modeled in three dimensions. The standard k-? turbulence model was used in simulating turbulent flow with conjugate heat transfer. The COMSOL models were developed to be fully parameterized to allow ...