VLSI Layout Based Design Optimization of a Piezoresistive MEMS Pressure Sensors using COMSOL Multiphysics
R. Komaragiri, Sarath. S., N. Kattabomman
NIT Calicut, Kozhikode, Kerala
This paper focuses on the diaphragm design and optimization of a piezoresistive Micro Electro Mechanical System (MEMS) pressure sensor by considering Very Large Scale Integration (VLSI) layout schemes. The aim of these studies is to find an optimal diaphragm shape by Finite Element Method (FEM) using COMSOL®, which is most suitable for VLSI layout. Optimal diaphragm shape is a diaphragm shape ...
Coupled Electromagnetic, Thermal and Fluid Dynamics Simulation of Axial Flux PM Synchronous Machines
DAEIMI, Department of Automation, University of Cassino, Cassino, Italy
This paper investigates the Electromagnetic and thermal behavior of Synchronous Axial Flux Permanent Magnet Machines. The Axial Flux machine employed for tests and simulations has a Soft Magnetic Compound stator core. The electromagnetic analysis is used to assess electromechanical variables and machine parameters. Furthermore, the thermal source is obtained from a DC current flow model which is ...
A. A. Bhat, S. Agarwal , D. Sujish, B. Muralidharan, B. P. Reddy, G. Padmakumar, K. K. Rajan
Indira Gandhi Center for Atomic Research, Kalpakkam, Tamilnadu, India
Induction furnaces are employed for vacuum distillation process to recover heavy metals after electro-refining operation. Induction furnace of suitable heating rate and cooled by passive means are required to be developed for this purpose. It is planned to set up a mock up induction furnace which will simulate the conditions to be realized in actual vacuum distillation furnace for this purpose. ...
H. Surdi, A. Singh, S. S. Prabhu 
Tata Institute of Fundamental Research, Homi Bhabha Road, Mumbai,India
Since the advent of Terhertz(THz) technology, improving the THz emission power has been one of the major research goal. One of the methods to increase the THz emission power is to increase the coupling of excitation laser light to the dielectric substrate.The field of nano-plasmonics exploits light-matter interactions at nanometer scale. With the help of metallic nano-structure at ...
V. Teotia, S. Malhotra, K. Singh, and U. Mahapatra
Bhabha Atomic Research Centre, Mumbai, Maharashtra, India
Liquid metal loops are used for heat removal and for the study of certain magneto-fluidic phenomenon like MHD (Magneto-Hydro Dynamic) effects. These loops operate at high temperatures and carry fluids that are invariably toxic in nature. Ensuring the purity of fluid in a closed loop application needs non-intrusive pumps electromagnetic pumps. We have designed and analyzed a prototype ...
Electrical Conductivity Modeling and Validation in Unidirectional Carbon Fiber Reinforced Polymer Composites
P. Banerjee, J. L. Schmidt
Department of Mechanical Engineering and Materials Science, Washington University in St. Louis, St. Louis, MO, USA
Carbon fiber (CF) reinforced polymer composites (CFRP) have begun to replace Al-Zn-Mg alloys in applications which require high strength-to-weight ratios. The anisotropy of CFRP composites is a result of melt crystallized extrusion techniques that impart an inherent directionality to the CFs and the associated material’s properties. Electrical conductivity was modeled across the entire CF ...
M. Kavasoglu, R. Haettel, and C.H. Ploetner
ABB Corporate Research, Västerås, Sweden
ABB Transformers, Varennes, Canada
Transformers, as any other industrial products, have to comply with various requirements on noise levels. Three main sources of noise can be identified in transformers: no-load noise or core noise generated by magnetostriction in the core steel laminations, load noise produced by electromagnetic forces in the windings and noise due to auxiliary equipment such as fans and pumps used in the cooling ...
A. Rosell, and G. Persson
Volvo Aero Corporation, Trollhättan, Sweden
Chalmers University of Technology, Göteborg, Sweden
Interaction between the probe and a defect in eddy current non-destructive evaluation is studied. Evaluation of sensor signal response is the basis for the calculation. In this work a differential sensor is considered and the problem regarded here is problem 8 from the testing of electromagnetic analysis methods (TEAM) workshops. The truncation, referring to the position of the outer ...
O. Craciun, V. Biagini, G. Mechler, G. Stengel, C. Reuber, A. van der Linden
ABB Corporate Research, Ladenburg, Germany
ABB Calor Emag, Hanau, Germany
COMSOL, Göttingen, Germany
Introduction: Medium voltage reclosers are representing nowadays an important link between transmission power systems and low voltage grids. With a high level of renewable energy penetration, the medium voltage networks are becoming bidirectional. Therefore, the associated switching devices must ensure the protection of newer types of power systems as well as new types of loads. The optimal ...
D. Križaj, Z. Top?agi?, B. Drnovšek
Faculty of Electrical Engineering, University of Ljubljana, Ljubljana, Slovenia
Numerical simulation of an electromagnetic trigger with a short-circuit ring is presented. The main goal of inclusion of a short-circuit ring in an electromagnetic trigger is to develop an element suitable for use in a circuit breaker with capabilities of selective switching. The main problem to be solved is vibration of a moving contact due to zero electromagnetic force between the anchor and ...