Rensselaer Polytechnic Institute, Troy, NY, USA
A model was developed to simulate the reaction, concentration field, flow field, and temperature distribution inside a Claus reactor for converting hydrogen sulfide to sulfur. The model considered two ideal reactors, a continuous stirred tank reactor and a plug flow reactor. As expected, two ideal reactors showed much different behaviors in terms of reactant conversion and operating temperature. ...
S.C. Seetharam, D. Jacques
Performance Assessments Unit, Institute for Environment, Health and Safety, Belgian Nuclear Research Centre (SCK•CEN), Mol, Belgium
This paper documents current status in the development of a coupled thermal-hydraulic-chemical-geomechanical numerical suite within COMSOL-MATLAB environment to address soil and concrete applications. The mathematical formulations are based on well-established continuum scale models unifying mass conservation, energy conservation, charge conservation, thermodynamic equilibrium and kinetics and ...
D. Lahaye, L. Cheng
DIAM, EEMCS Faculty, TU Delft, The Netherlands
Tsinghua University, Beijing, China
In the production of high quality materials by a heat treatment, it is indispensable to accurately predict the temperature inside the furnaces being employed. In this work we develop a turbulent combustion model for the heat being released by gas burners inside a shaft kiln. Turbulent combustion is the strongly coupled phenomena of the chemically reacting fuel and oxygen in a turbulent flow. We ...
Eindhoven University of Technology, Eindhoven, The Netherlands
In this paper a new method for turbulent combustion modeling is introduced in COMSOL Multiphysics®. The method is called Flamelet Generated Manifolds (FGM). The method is based on the concept of flamelets, elemental reaction layers in combustion. The only hypothesis is that the turbulent combustion takes place in the Thin Reaction Zones regime (TRZ). A regime that normally is the case in gas ...
N. Ghasem, M. Al-Marzouqi, N. Abdul Rahim
UAE University, Al-Ain, United Arab Emirates
A comprehensive mathematical model that includes mass and heat transfer was developed for the transport of gas mixture of carbon dioxide and methane through hollow fiber membrane (HFM) contactor. COMSOL Multiphysics® was used in solving the set of partial, ordinary and algebraic equations. The model was based on "non-wetted mode" in which the gas mixture filled the membrane pores for ...
F.T. Wandschneider, M. Küttinger, P. Fischer, K. Pinkwart, J. Tübke, H. Nirschl
Fraunhofer-Institute for Chemical Technology, Pfinztal, Germany
Karlsruhe Institute for Technology, Karlsruhe, Germany
A two-dimensional stationary model of a vanadium oxygen fuel cell is developed in COMSOL Multiphysics®. This energy storage device combines a vanadium flow battery anode and an oxygen fuel cell cathode. The oxygen reduction reaction generates additional water, leading to a degradation of the catalyst performance over time. A logistic function is introduced to the Butler-Volmer equation in order ...
S. Odiba, M. Olea, S. Hodgson, A. Adgar
Teesside University, School of Science and Engineering, Middlesbrough, United Kingdom
This research deals with the design of suitable microreactors for the catalytic oxidation of volatile organic compound (VOCs), using propane as a model molecule. The microreactor considered consists of eleven parallel channels, in which an Au/Cr/γ-Al2O3-catalyzed combustion reaction takes place. Each channel is 0.5 mm diameter and 100 mm long. The catalytic microreactor was simulated for ...
L. T. Izu, Z. Coulibaly, B. Peercy
University of California-Davis, Davis, CA, USA
University of Maryland, Catonsville, MD, USA
This paper utilizes the COMSOL Multiphysics® general form PDE interface and MATLAB® to model stochastic calcium waves in a sarcomere (basic unit of a heart cell). The model we present here shows the evolution of waves generated from calcium being released stochastically from sites modeled as point sources. The release sites are distributed on z-disc (planes) in a hexagonal pattern, and their ...
S. Mahajani, S. Srikantiah, G. Samdani, A. Ganesh, P. Aghalayam
Department of Chemical Engineering, Indian Institute of Technology Bombay, Mumbai, Maharashtra, India
Indian Institute of Technology Madras, Chennai, India
UCG is a process which converts coal to syn gas at the underground coal seam itself. UCG can help meeting the rising energy demand by utilizing coal resources that otherwise would be too deep, or of poor quality, or simply not economical to mine. As UCG takes place, a cavity is formed underground in the coal seam which grows three-dimensionally. The objective of this work is to develop a ...
J. Schöne, A. Körnig, W. Beckert
Fraunhofer IKTS, Dresden, Germany
Reformer and catalytic burners are common components in fuel cell systems, crucial for efficient preparation of fuel and exhaust gases of the fuel cell stack. We intend to show the influence of radiation to the temperature distribution inside of a reformer unit. The model consists of an axisymmetric representation of the inlet-zone and a catalytic porous zone. Fluid flow, convective and ...