Estimation of Hydraulic Conductivity for a Heterogeneous Unsaturated Soil Using Electrical Resistivity and Level-Set Methods - new
T. K. Chou, M. Chouteau, J. S. Dubé
École Polytechnique de Montréal, Montréal, QC, Canada
École de Technologie Supérieure, Montréal, QC, Canada
The estimation of the soil saturated hydraulic conductivity (Ks) is crucial in understanding water flow and transport of contaminants. There are many hydrological techniques available in determining this parameter (constant head method, in-situ soil analysis, etc...). While these techniques can provide quality data points, they are often limited by sparse data sampling and scale. Therefore ...
R. Caulk, J. McCartney, E. Ghazanfari
University of Vermont, Burlington, VT, USA
University of Colorado, Boulder, CO, USA
In this study, a model of in-situ geothermal energy piles was constructed using COMSOL Multiphysics® software. Geothermal energy piles serve two purposes, first to transfer building load into the subsurface, but also to extract thermal heat from surrounding soils. This is achieved using a heat pump coupled with embedded heat exchangers. As a result, a multiphysics problem is introduced - heat ...
Georg-August University, Göttingen, Germany
Energy piles, i.e. heat exchangers located within the foundation piles of buildings, are used for heating of cooling purposes. Although the absolute values of deformations and temperature gradients are low or moderate, the entire setting can be influenced by thermo-hydro-mechanical coupling. The fluctuating thermal regime may affect the deformation of pile and surrounding ground as effect of ...
H. Ali Akhlaghi Amiri
University of Stavanger, Stavanger, Norway
Wettability affects two-phase displacements in porous media by determining the microscopic distribution of fluids in pore spaces. The impact of wettability on transport properties at macro-scales has been widely addressed in literature; however a deeper understanding of wettability effects demands pore-level investigations which are still limited. In this paper, COMSOL Multiphysics® software ...
E. Dagher, G. Su, T. S. Nguyen
Canadian Nuclear Safety Commission, Ottawa, ON, Canada
COMSOL® software was used to simulate the conductive heat transfer with phase change in the geological formations encompassed in permafrost surrounding a shallow thaw lake. The purpose of the simulation was to verify the adequacy of COMSOL to model such phenomena by comparing the COMSOL results to those obtained by another FEM model (Ling and Zhang, 2003). The graphical comparison of the ...
Department of Chemical Engineering, University of Arkansas, Fayetteville, AR, USA
During the hydraulic fracturing process, there can be possible re-activation of closed/sealed faults and natural fractures in the formation, which may lead to changes in the boundary conditions of the reservoir. While study models of shale gas formations have utilized the concept of a closed reservoir in order to optimize the production of gas in the well-bore, this assumption cannot be adopted ...
Modeling of Ultrasonic Transducers and Ultrasonic Wave Propagation for Commercial Applications Using Finite Elements with Experimental Visualization of Waves for Validation - new
D. R. Andrews
Cambridge Ultrasonics, Over, UK
Finite element (FE) modelling of ultrasonic propagation using COMSOL Multiphysics® simulations can be used to create images of waves. Unfortunately, in time-stepping solutions, it is possible for numerical instabilities to grow large and dominate the solution adversely. Any design of transducer that is based upon poorly-configured FE models is unlikely to perform as expected and will almost ...
G. Ha, S. S. Kim, J. H. Kim
Chungnam National University, Daejeon, Korea
Here we aim to advance geomagnetic modeling approaches using COMSOL Multiphysics® software and improve the degree of detail that can be obtained from the measured magnetic field. First, we carried out benchmark tests by comparing the computed results using the widely used analytic solutions for rectangular bodies with arbitrary direction of magnetization with those from the AC/DC Module of ...
D. Swaminathan, G. Minerbo, K. Pathak
Drilling and Production Group, Schlumberger, Houston, TX, USA
Introduction Computer simulations are widely used for the interpretation and inversion of electromagnetic measurements in well logging. Until recently, simulated logs have been computed with approximate 1D or 2D models. By using the COMSOL® RF Module installed on a cluster, we show that a full 3D finite-element simulated log can be obtained within an acceptable turnaround time. Use of ...
G. Perillo, A. Monetti, A. Troiano, M. G. Di Giuseppe, C. Troise, G. De Natale
University of Naples Parthenope, Naples, Italy
INGV-Osservatorio Vesuviano, Naples, Italy
Geothermal systems represent a large resource that can provide, with a reasonable investment, a very high and cost-effective power generating capacity. Despite its unquestionable potential, geothermal exploitation has long been perceived as limited, mainly because of the dependence from strict site-related conditions, mainly related to the reservoir rock’s permeability. In this work, SP ...