H. S. Shriram, T. Nimje, D. Vakharia
BITS Pilani, Rajasthan, India
Radio Frequency MEMS devices have emerged to overcome the problem of high losses associated with semiconductors at high frequencies. A tunable MEMS capacitor is a micrometre-scale electronic device whose capacitance is controlled through different actuation mechanisms which govern the moving parts. It can have electrostatic or electrothermal actuators depending on the functional complexity and ...
S. A. Selvin, N. B. Moorthy, G. Anju, and M. Alagappan
PSG College of Technology
Tamil Nadu, India
This paper chalks out the design and performance of a piezo resistive surface micro machined circular diaphragm based pressure sensor. A structural deformation in the piezo resistive nano structure placed above the diaphragm will result in varied current density, which is in direct accordance with the applied pressure. This effect relies on the principle of piezo resistivity and employing a nano ...
L. Sujatha, B. Preethi
Rajalakshmi Engineering College, Chennai, India
MEMS gyroscope technology provides cost- effective method for improving directional estimation and overall accuracy in the navigation systems. This paper presents a tuning- fork gyroscope (TFG)  with a perforated proof mass. The perforated proof mass used in the design enables the reduction of the damping effect. This MEMS based gyroscope was designed using COMSOL Multiphysics 4.2a. This ...
Numerical Modeling of Dielectrophoretic Forces Acting upon Biological Cells in Silicon Lab-On-Chip Devices
S. Burgarella, M. Bianchessi, and M. De Fazio
Advanced System Technology, R&I e-Health, STMicroelectronics, Agrate Brianza, Italy
Dielectrophoresis (DEP) is a promising method for the automated separation of biological cells in a miniaturized format. This technology allows cells to be manipulated electronically while suspended in a microfluidic channel embedded in a silicon lab-on-chip. In this work, several dielectrophoretic configurations have been designed and fabricated using micro-electro-mechanical-systems (MEMS) ...
ACOUSTICS@MBD CONSULTANTS, LLC, Westborough, MA, USA
There is a practical interest among composite materials manufacturers to high-speed accurate non-destructive evaluation (NDE) technology for voids inspection when these voids are natural components of such complex structures like resin insulated layer of double-sided copper-clad laminates. Model based design (MBD) of NDE system is one of principal solutions for voids inspection in such composites ...
E. Nesvijski[1,2], R. Sahul
Western New England College, Springfield, MA, USA
TRS Technologies, State College, PA, USA
Finite element analysis (FEA) is a modern tool for exploration of new horizons in science, technology and engineering. Different computer software such as ANSYS, ABACUS, PZFLEX and COMSOL Multiphysics® based on FEA are used for modeling and simulation of acoustic phenomena, for design of new and optimization and improvement of existing acoustic engineering systems. This work presents application ...
J. Crompton, S. Yushanov, L.T. Gritter, K.C. Koppenhoefer
AltaSim Technologies, Columbus, OH, USA
The resonance conditions for surface plasmons are influenced by the type and amount of material on a surface. Full insight into surface plasmon resonance requires quantum mechanics considerations. However, it can be also described in terms of classical electromagnetic theory by considering electromagnetic wave reflection, transmission, and absorption for the multi-layer medium. The two commonly ...
T.Madhuranath, R.Praharsha, Dr.K.Srinivasa Rao
Lakireddy Bali Reddy College of Engineering, Mylavaram, Andhra Pradesh, India
MEMS is the leading technology which combines both electronic and mechanical devices on a single microchip. Tracing the position of the object is an important problem in engineering. This can be addressed by Gyroscopes. These sensors are used to find orientation and angular velocity. This paper focuses on 3D MEMS Piezoelectric Gyroscope. COMSOL Multiphysics® is used for designing and ...
Dynamic Characterization and Mechanical Simulation of Cantilevers for Electromechanical Vibration Energy Harvesting
N. Alcheick, H. Nesser, H. Debeda, C. Ayela, I. Dufour 
Univ. Bordeaux, IMS Lab, Pessac, France
Energy harvesting from ambient vibrations has become an interesting topic for powering wireless sensor networks. Resonant microdevices based on MEMS have become of central importance at low frequency. The power produced at resonance is at least one order of magnitude larger than off frequency power since the largest strain is obtained at resonance. In order to obtain large strain for efficient ...
H. du Plessis, W. Perold
University of Stellenbosch, Stellenbosch, South Africa
Surface acoustic wave (SAW) devices are widely used for their sensing capabilities and gas sensing is only one of many uses. There is an ever increasing need to make them as effective as possible by adding nanomaterials to the device. In this study a two-port delay-line structure with 128YX lithium niobate was simulated with COMSOL Multiphysics® in the form of a 2D cross-section. ZnO nanopillars ...