S. Wieneke, S. Brückner, and W. Viöl
University of Applied Sciences and Arts, Göttingen, Germany
The heating-up of existing dense plasma with short laser pulses is modelled with COMSOL Multiphysics. The interaction between plasma and the laser beam as a longitudinally pumped light source is discussed. The required properties of the plasma, according to the radial profiles of the temperature and the density, are exemplified.
R. Ernst, C. Garnier, P. Petitpas, and C. Trassy
SIMAP-EPM Laboratory (CNRS), Saint Martin d'Hères, France
The cold crucible is a useful tool for the elaboration of high purity materials by electromagnetic fields. The application areas range from titanium part elaboration, for the aeronautic industry or in medical prosthesis, to silicon purification for the photovoltaic industry. In this paper, the main results of a 3D electromagnetic model of a cold crucible from a former paper are briefly ...
V. Mathur1, J. Li1, J. Therrien2, and W. D. Goodhue1
1Photonics Center, Department of Physics and Applied Physics, University of Massachusetts, Lowell, MA, USA
2Department of Electrical Engineering, University of Massachusetts, Lowell, MA, USA
Several methods have been demonstrated for depositing nanotubes on microstructures, ranging from using an atomic force microscope (AFM) tip for single tube manipulation to chemically pre-patterning the substrate. However, these techniques have a very low yield and poor reproducibility. Sorting techniques involving filtration and ultrasonication face similar issues. Recently, electric field ...
Energy Exchange During Electron Emission from Carbon Nanotubes: Considerations on Tip Cooling Effect and Destruction of the Emitter
M. Dionne, S. Coulombe, and J. Meunier
Department of Chemical Engineering, McGill University, Montreal, Quebec, Canada
Murphy and Good general theory for electron emission from metal surfaces was used to predict the field-emission capabilities of ideal arrays of vertically aligned carbon nanotubes (VACNT). The Nottingham effect was taken into account in order to explain experimental observation of a localized cooling of the VACNT tips during field emission and the total destruction of very short emitters at ...
Design and Development of Microsystems within a Corporate Research Environment by Utilizing Comsol Multiphysics
Corporate Research & Technologies
Alexander Frey received his M.A. degree from the University of Texas, Austin, in 1994, the Dipl. Phys. degree from the University of Wuerzburg, Germany in 1997 and the PhD from the Saarland University, Germany in 2010. In 1997 he joined Research Laboratories of Siemens working on the design of DRAM sensing circuits. In 1999 he joined Corporate Research, Infineon, Munich, Germany. He was engaged ...
I. Quintana, Z. Azpilgain, D. Pardo, and I. Hurtado
Mechanical and Industrial Production Department, Faculty of Engineering, Mondragon Unibertsitatea, Loramendi 4, Mondragon 20500 Gipuzkoa, Spain
Department of Applied Mathematics, Statistics, and Operational Research, University of the Basque Country (UPV/EHU), Leioa, Spain, and IKERBASQUE (Basque Foundation for Sciences), Bilbao, Spain
This paper describes a numerical solution method for the simulation of a cold crucible induction melting (CCIM) process involving the coupling of electromagnetic, temperature and turbulent velocity fields. During the CCIM process, the metal charge is contained on a water cooled segmented copper crucible, and the energy necessary to heat, melt, and overheat the charge is generated by an ...
G. Selembo, P. Selembo, J. Stanton, and G. Paulsen
University of North Carolina
Surface aeration systems are used in the wastewater treatment industry for the transfer of oxygen in the activated sludge process. These systems are capital intensive and also require a significant amount of energy to operate. Scale-up and design of these systems is largely empirical, and due to the size of these systems, modifications for experimental testing can be economically prohibitive. ...
Level Set Method for Fully Thermal-Mechanical Coupled Simulations of Filling in Injection and Micro-Injection Molding Process
M. Moguedet, R. Le Goff, P. Namy, and Y. Béreaux
Pôle Européen de Plasturgie, Bellignat, France
SIMTEC, Grenoble, France
INSA de Lyon, Site de Plasturgie, Bellignat, France
In this work we tackle a more theoretical aspect of micro-injection molding, to better understand physics during the process, through numerical simulations of cavity filling. We developed a two phase flow approach by the use of COMSOL Multiphysics®. In a first step, a Level Set model is applied to several configurations: Newtonian and non Newtonian fluid (Cross viscosity law), coupled with a ...
e2v Ltd., Essex, United Kingdom
There is a requirement for an RF (Radiofrequency) industrial dryer that will be capable of dehydrating foodstuff to the correct level after the product has been fried. RF drying should actively target moisture, due to waters high dielectric properties. An industrial dryer can be optimized using modeling to obtain the correct moisture removal rates in the RF drying process. Measurement of the ...
N. Brahmia, P. Bourgin, M. Boutaous, and D. Garcia
 Laboratoire de Recherche Pluridisciplinaire en Plasturgie
 Pôle Européen de Plasturgie Belignat
Thermoplastic polymers are frequently used in several industries, and represent the most important group of polymeric materials. During the injection moulding process, the cooling phase including solidification is often the most significant part of the manufacturing cycle. In this paper we study the coupling phenomena between the crystallization and the thermal kinetics in the polymer ...