TEL Technology Center, America, LLC
Hydrogen plasma is typically used in the semiconductor industry for materials processing, surface preparation and cleaning of silicon wafers and thin films. In this contribution, we developed a 2D/3D plasma fluid model as described by the set of the species and energy balance equations in a generic semiconductor tool chamber with remote Inductively Coupled Plasma (ICP) source. Background ...
S. Prabhakar and J. Raynolds
College of NanoScale Science and Engineering, University at Albany, Albany, NY, USA
Non-charge-based logic is the notion that an electron can be trapped and its spin manipulated through application of gate voltages. Numerical simulations of Spin Single Electron Transistors (SSET) at University at Albany, aimed at practical development of post-CMOS concepts and devices is presented. We use COMSOL based multiphysics finite element simulation strategy to solve the ...
E. Furlani, and A. Baev
The Institute for Lasers, Photonics and Biophotonics, University at Buffalo, Buffalo, NY, USA
Plasmonic-based optical trapping is in its infancy and growing rapidly. Research in this area will significantly advance fundamental understanding in fields such as nanophotonics and biophotonics. Novel plasmonic trapping structures and systems can be designed and optimized using the COMSOL RF solver. We present a study of plasmonicbased optical trapping of neutral sub-wavelength ...
Dinex Emission Technology A/S, Middelfart, Denmark
Exhaust noise must meet legislation targets, customer expectations and cost reduction which call for design optimization of the exhaust systems in the design phase. One solution is to use 3 dimensional linear pressure acoustics and calculate the transfer matrix of the muffler. The transfer matrix is the basis for calculating either the insertion loss or transmission loss of a muffler. The 3D ...
T. Machado Amorim , C. Allély, J. Caire
Arcelor Mittal Research, Maizieres-les-Metz, France
ENSEEG, Grenoble, France
The corrosion at cut-made edges is significant due to the anode to cathode surface ratio in this region. The major problems are the risks of red rust appearance at the exposed steel surface, and the risks of paint delamination in case of insufficient corrosion protection. The work presented here focuses on the development of a 2D FEM model simulating a steady state corrosion situation at a cut ...
Vanderbilt University, Nashville, TN, USA
Carbon nanotube FETs are generating much interest in the nanoscale electronics area. Typically subthreshold behavior in these devices has been modeled using the Laplace equation. Above threshold behavior uses self-consistent solutions to the Poisson and continuity equations. Accurate modeling of Carbon nanotube FETs needs to include quantum effects such as tunneling. Owing to the coupled nature ...
H. Schmidt[1,2], and J. Hattel
Technical University of Denmark, Kgs. Lyngby, Denmark
HBS Engineering, Frederiksberg, Denmark
Two friction stir welding models are presented – a global thermal model using the temperature dependent heat source and a local material flow and heat generation model allowing for detailed investigation of different contact conditions. The two models are coupled into a larger local-global model. The flow model includes frictional dissipation from the contact between the work piece and the ...
Texas A&M University, College Station, TX, USA
The present work focuses on the use of piezoelectric materials as actuators for shape control of composite laminates such as Lead Zircronate Titanate (PZT), and other piezoelectric fiber composites such as Active fiber composites (AFCs), Microfiber Composites (MFCs) which allow for improvement of their constitutive properties. By using embedded actuators, such that, the active part is ...
C. Strozzi, P. Gillard, and J-M. Pascaud
Institut PRISME, Bourges, France
The aim of this work is to present a simple multiphysics simulation using COMSOL able to describe combustion of kerosene vapours in a closed vessel. The emphasis is on the mechanical effects of the reactive processes. The evolution of the thermodynamical variables (pressure, temperature, concentrations…) is obtained by solving several coupled transport equations for: the mass continuity, the ...
COMSOL Modeling of Groundwater Flow and Pollutant Transport in a Two-Dimensional Geometry with Heterogeneities
M. Gobbert, M. Whitmore, B. Peercy, M. Baker, and D. Trott
University of Maryland Baltimore County
The Delmarva Peninsula is located on the East Coast of the United States, between the Chesapeake Bay and Atlantic Ocean. Industrial farming in the Delmarva Peninsula leads to levels of nutrients nitrogen, which grossly exceed natural levels and greatly impair the health of the bay. The main source of water carrying excess nitrogen to streams is groundwater. We use the software package COMSOL ...